Turtle - Red Dragon - Granite - 1st (m2)

General information

Important: The price per m2 is a reference (It is best to consult directly on WhatsApp the model and the number of m2 or boxes you need. This way we consult stock with the warehouse staff of the quantity you need, we quote the best price and coordinate the pick up or delivery of your order.

📲 ORDER THE M2 OR CLOSED BOXES YOU NEED (On Whatsapp main commercial attention)

☑️ Official Distributor of Blangino, Argentina:

We are Direct Distributors of Blangino. We offer the best price on the market with all payment methods. We make immediate deliveries to the entire country (Argentina). Coordinate your order for Blangino products at the best price on the market and with the most convenient shipping or pickup method for you!

🌟Granitic🌟
( Granitic Tile )

Granite tiles are ideal for sidewalks, galleries or different exteriors due to their great resistance.
The factory finish is polished, which is why they have an excellent shine and require a low level of maintenance.
These tiles present a new system of BUILT-IN JOINT SEPARATORS. A system of 2 ribs on each side of the plate that allow quick, homogeneous and neat placement.

✅ Blangino - Granite Floor Specialists

Welcome to Valle Austral, the main distributors of Blangino Mosaics! Since 1966, Mosaicos Blangino has been dedicated to the manufacture of granite floors for interior and exterior. Its wide range of tiles, slabs and tiles ensures a firm and functional floor for a variety of projects. We are proud to be in charge of marketing all their products, providing quality and confidence to our clients in each project they undertake.

🎖️ Quality Policy - Granite Coatings and Floors

✅ Selection

Its mosaic factory carries out a demanding selection of raw materials based on different characteristics, such as control of stone granules, colors, proportions, granulometry (sieving), cleanliness, firmness, and others. The most important analyzes are carried out etc.

Dyes: control of solubility and tones, degree of settling, etc.

Cements: tone of each batch, periodic resistance evaluations, deposits in a battery of silos of 70 Tn, each, to avoid the use of hot cement, which is detrimental to the production of floors.

✅ Dosage

The materials testing laboratory and years of experience determine the exact mix, by weight and volume, of all raw materials, to obtain the best quality.

✅ Technology

The most advanced machinery in the world for the manufacture and polishing of granite floors is used to manufacture these products. The linear polishers have 6 and 8 heads, two with diamond rings for coarse grinding and the rest with abrasive stones of different finishes. In this way, polished floors are delivered, ready to be used in any type of work.

✅ Technique

Curing in steam chambers is the technique that allows rapid setting and hardening of floors, increasing their resistance. In this way, manufacturing is carried out in shorter times and with an excellent finish. This drying avoids energy consumption and waste of resources.

✅ Optimization

To achieve a substantial improvement in the floors, different additives are incorporated into each dosage: waterproofing, fluidizing agents, bridges, adherents, accelerators, and others.

✅ Control

A strict selection of finished products discards all material that could present defects in its finish, and a team of civil and chemical engineers supported by the laboratory, carries out quality control according to IRAM 1522 Standards: Shock Wear, Flexion, Absorption.

IRAM 1522 Standards (Complied)

♻️ Environmental Policy and Values ​​♻️

Valle Austral deeply values ​​the ecology of Blangino products and supports its environmental policy in manufacturing:

We care about the care of natural resources and take measures to conserve them. The water used in the manufacturing of our products is recycled in a closed circuit and treated in settling tanks for indefinite reuse.

The drying process of the mosaics is carried out in setting chambers, achieving natural drying in 24 hours without the emission of gases or toxic residues.

Our products do not contaminate the environment, and the waste generated is reused as construction material.

FACILITY

For outdoor or indoor use:

• WEBER: Superflex
• MAPEI: Keraflex
• KLAUKOL: Flex
• Glue for Concrete or Stone Pieces (Let the experienced installer work)

Quickly wipe off the excess before the paste hardens.

*We suggest that all installation work be carried out by an experienced professional.

✅ SUGGESTED STEPS AND INSTRUCTIONS FOR PLACEMENT

1. SURFACE PREPARATION

The plates can be placed on a common subfloor or on concrete. Given its characteristics, it does NOT require a Smoothed Folder ("floored folder", "cement folder" or "leveled folder").
In areas with high water tables or surfaces with a high percentage of humidity, the subfloor will require water-repellent insulation.
Surfaces must be free of dust and grease.

2. SEATING MORTAR OR RECOMMENDED MIXTURES

Use one of these mixtures as a base mortar:
MORTAR
Mixture A: 3 Buckets of Sand + 1 Bucket of Common Cement
Mixture B: 4 Buckets of Sand + 1 Bucket of Common Cement + 1/2 Bucket of Masonry Cement.

3. PLACEMENT OF THE TRADITIONAL TWO-LAYER MOSAIC

a) Distribute the mixture on the surface (approximately 2cm thick) and cut with the spoon on the edges, so that it does not rise in the joints (A).

b) If you do not use MORTAR, paint the reverse side of the plate with a slurry prepared with 2 (two) parts of masonry cement or common cement and 1 (one) part of water and place immediately before the slurry dries. . To do this, use a foam rubber sponge or brush (B).

c) THE PRODUCTS HAVE BUILT-IN JOINT SPACERS WHICH WILL ALLOW YOU TO CARRY OUT QUICK AND CLEAN INSTALLATION (C).
Place the painted plate on the mixture and level it with strokes of dough (D) or rubber dough so that it adheres well to the mixture. The resistance of our products withstands shocks without problems.

d) As a finish we recommend the use of baseboards to avoid dirtying the walls when cleaning or waxing the floor. The baseboards must be placed above the floor with GLUE, respecting the joint of the placed floor.

4 TAKEN TOGETHER

It must be done after 24 hours and before 48 hours after the placement is completed. The joint to be filled must be "perfectly clean" and free of impurities. We recommend the use of Pastina JB, made by Blangino. Yield: 1 to 1.5 kg x m²
Dosage: 1.5 parts of Pastina JB + 1 part of water. Pastina JB must be mixed for a few minutes so that the additives work well. Its consistency should be creamy and light.
so that it easily penetrates the ENTIRE joint. a) Distribute the paste with a rubber dryer until it penetrates the entire joint.

b) Carry out the movements of the dryer diagonally to the joint, so as not to drag the paste from it. (E)

c) We recommend VERIFYing that all the joints are filled completely, to do this, go over them with a spatula (F) or seal them by sprinkling dry paste, rubbing in a semicircular manner. Remove excess paste from the surface, before drying with a dry cloth.

d) Curing is essential to achieve correct hardening of the joint paste. To achieve this, we suggest keeping the joints and floor moist with a gentle mist of water for 24 hours.

e) Avoid dirtying the joint, do not step on it for 48 hours.

Remember that these products, because they are made with natural raw materials and cement, retain a certain degree of residual moisture after their production, which manifests itself in slight differences in tone and shine during a brief stage after placement. After this first period, with the use and maintenance of the floor, it will gradually acquire the beauty and uniformity of color and shine that characterizes it."

Wash your floors with JB Neutral Detergent and apply, depending on use, JB Colorless Wax

• Sales format: per m2, closed box or pallet

💸Prices :

• I got the best price on the market by paying by Transfer or Bank Deposit (Take advantage of this final Price without the Web Tax) CONSULT US on WhatsApp!

🚚 Shipping:
(Across the country, we reach all provinces with the best transportation)

• Branch withdrawal
• Pickup at the logistics operator's branch

• Home delivery
• Shipped to the logistics operator's branch

• Coordinated deliveries (CABA and GBA)
• Extra fast shipping
• Shipping all over the country

Shipping costs vary depending on the delivery destination and the characteristics of the order.
The shipping cost includes transportation, insurance and VAT.

🛍️ Payment Methods :

You have the best price in Transfer or Bank Deposit, take advantage of the wholesale price.

• Cash
• Debit
• Credit (3 and 6 interest-free installments) with Mercado Pago
• Transfer or Bank Deposit (25% Discount)

📝 Quote :

Check our wholesale prices . Tell us what type of work you want to do, what material or type of design you like and how many m² you need. We quote you so that you can get the best price , and the most convenient shipping and payment conditions for you .

📲 Ask all your questions via WhatsApp

👩🏻‍💻 Our Operators will respond to you as soon as possible

At Valle Austral our interest in you is evident!